---
title: "Print stickers"
description: "How to download print-ready PDFs from the portal, which paper to use and how to cut out the cards."
---

> Documentation Index
> Fetch the complete documentation index at: https://docs.bumpdata.se/llms.txt
> Use this file to discover all available pages before exploring further.

# Print stickers

You print the stickers from the portal as a PDF. The PDF is exact to the millimetre, so what you see on screen is what you get on paper.

## One vehicle

1. **Open the vehicle**

   Go to **Vehicles** in the portal and select the vehicle. The **QR code** card is on the vehicle's page.
2. **Choose a format**

   Choose one of the four formats. The preview shows the card in the correct proportions.
3. **Download the PDF**

   Click **Download PDF**. The file contains one A4 sheet with the card and cut lines.

## The whole fleet

1. **Open the QR print sheets**

   Go to **QR print sheets** in the portal. Filter by organisation, make or model year to select vehicles.
2. **Choose format and content**

   Choose a format. Turn on **Show vehicle info** if the make and model should appear on the card, so that drivers find the right sticker.
3. **Download the PDF**

   The portal shows how many A4 sheets you get. Click **Download PDF**.

## Paper and printer

- Print at **100%** (actual size). Do not choose "Fit to page", as that shrinks the cards.
- **Dashboard, Sun visor and Label** print on self-adhesive A4 sheets (label paper). The card is then ready to stick on.
- **A6** prints on plain or heavier paper and goes in a holder or pocket, or on self-adhesive sheets if you want to stick it on.
- Use a laser printer if you have one. Ink can smear if the sticker gets damp.

## Cut out the cards

The cards sit edge to edge with a thin grey line around each card. Cut along the line with scissors or a paper cutter; the line disappears in the cut. If the cut is off, the QR code gets a little extra margin on one side. This does not affect scanning.

> **Test before you print everything**
>
> Print one sheet, cut out one card and scan it with your phone. If Bump! opens with the correct vehicle, the settings are right.

Next step: [Mount the sticker](/en/qr/montera/).

Source: https://docs.bumpdata.se/en/qr/skriv-ut/index.mdx